Eagle library

This page contains my Eagle library.  Please let me know if you find it useful, or if you amend any of the parts.  I will keep it updated based on feedback received.

The library is currently v5 and contains parts for:

  • An 8x8 LED matrix (LEDM88G from Futurlec)
  • MIC5891 and MIC5821 latched drivers
  • Maxim DS1337 RTC
  • DC jack plug (modified with large holes, suitable for PCB manufacturers who do not mill slots)
  • RFM12 radio module (with pins)
  • Keystone CR123A battery holder
  • Memsic MXC6202 I2C accelerometer
  • ON Semi CAT6219 500mA LDO regulator
  • Texas Instruments TSL2560 / TSL2561 light-to-digital converter
  • Maxim DS620 Low-Voltage, ±0.5°C Accuracy thermometer

All of the libraries, PCBs, schematics and other electronics items on my site are covered by the Creative Commons Attribution-NonCommercial-ShareAlike 3.0 license. Please email me if you'd like to use any of these commercially.

Images

Download

Download the library - XML format, suitable for use with Eagle 6+

10 comments on “Eagle library
  1. DMKitsch says:

    nice library dude, thanks 🙂

  2. fadh aim says:

    thanks dude

  3. RB says:

    Thanks for this - your DC jack plug object was just what I was after as I'm using http://oshpark.com PCB service as they don't mill slots.

  4. Free as in beer says:

    Why must you use a non-commercial, license? Without trying to be offensive, IMHO you should get a sense of pride that people are reusing your library no matter what the purpose is (e.g., SparkFun, Adafruit, Arduino all do this)... Just my $0.02.

  5. David says:

    My work, my rules. The three organisations you list are commercial entities who want you to buy products from them, the files they release are a part of this package.

    If someone wanted to use any of my work in a commercial product they should email me - I would almost certainly approve.

  6. Deeds says:

    Thanx for this library. It will save me a lot of time in my project with the RFM12B module.

  7. Pawel says:

    Great library, thanks a lot!

  8. David says:

    Updated to v5 today based on feedback from Mike Eftimakis. The DS1337 pinout was incorrect in previous versions, this is now fixed.

  9. adams says:

    plz i want the library of matrix led8x8

  10. David says:

    Please use the download link above.

1 Pings/Trackbacks for "Eagle library"
  1. [...] board uses the MIC5821 footprint from the following library: MIC5821 footprint Warning!I do not place any warranty on any files given here or guarantee that it is a working [...]

Leave a Reply

Your email address will not be published. Required fields are marked *

*